Cyberpower Users: How Do You Remove the Front Panel?

For those who have the Cyberpower or have used the X-Blade case? How do you remove the front panel to add/remove more drives? I know it can be done as shown below, but I cannot figure it out. There are no visible screw or latches. What am I missing?

http//www.overclockercafe.com/Reviews/cases/X-Blade/pics/12.jpg[" alt=""/img41322dc4e9][img="41322dc4e9]http//www.bigbruin.com/reviews/xbladecase/small/pic8.jpg[" alt=""/img41322dc4e9]

Just twist the metal protector behind the black cover off, then pop out the black drive bay cover from the inside. Or just pry the black cover off from the outside then twist the metal piece off. You don't have to remove the whole front panel (as shown in your pic) just to add a drive.

black drive bay cover removed from my case (notice the clips on each end)
http//www.flm-trucks.com/bbhracing/images/baycoverthb.jpg[" alt=""/img6ca2f3c46e]

If you still want to remove the front panel for whatever reason, all you should have to do is pop it out by pinching then pushing these clips out as shown in the pic below.

http//www.flm-trucks.com/bbhracing/images/frontpanel.jpg[" alt=""/imgeda8aecaa4]

There's a few of these on both sides from top to bottom.

I use a pair of pliers to do the pinching. )

I noticed those clips, but since they were not easily adjustable by hand, I thought they were unmovable. Anyway, thanks for the info.